a:6:{s:1:"k";s:46:"categories-v3-a8cc967ea5cfd4553ffea1dc1a2f699b";s:1:"d";a:5:{i:0;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:2:"D5";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047837006";s:13:"products_name";s:69:"Solar panel 5W with integrated lithium battery 6V 6000 mAh for HK-Bat";s:19:"products_extra_text";s:8:"Test ???";s:17:"products_quantity";i:61;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"503_0.jpg";s:15:"products_weight";s:5:"0.980";s:26:"products_short_description";s:346:"
- integrated charge controller and voltage regulator
- Indicator lamp for battery charge level
- 2 m connection cable
- Dimension : 170 x 115 mm without bracket
- Bracket for wall and floor mounting
Just a few days of sunshine per year are enough for the Poultry Security Door PSD to run smoothly.
Scope of delivery:
monocrystalline solar panel 4W dimension : 177 x 177 mm without bracketPlease use the solar panel to charge the built-in battery in the sunlight for 3-4 days for the first time ( about 16 hours when charged by sufficient sunlight ).
- Charging indicator with green LED is flashing when the battery is charging and is on continuously when the battery is fully charged.
- Status indicator with red LED is on, indicating that everything is normal.
- Status indicator with yellow LED indicates whether the output voltage is output.
Attention, please note !
1. The charging power of the solar module is directly related to the intensity of the sun's rays and the angle of the solar module to the sun. solar module to the sun.
If the conditions are not met, the battery will not be charged sufficiently.
2. Do not use a load that does not match the voltage and current, which could cause that the electronics do not work or burn out!
3. Observe battery note for disposal!
- integrated charge controller and voltage regulator
- Indicator lamp for battery charge level
- 2 m connection cable
- Dimension : mm without bracket
- Bracket for wall and floor mounting
";s:20:"products_description";s:4492:"suitable for HK-Bat from JOSTechnik with use attract light
- with integrated charging electronics, as well as 2 m connection cable and bracket for wall or floor mountingJust a few days of sunshine per year are enough for the HK-Bat to run smoothly when using attraction light up to 2 h daily.
Scope of delivery:
monocrystalline solar panel 12W dimension : mm without bracketPlease use the solar panel to charge the built-in battery in the sunlight for 3-4 days for the first time ( about 16 hours when charged by sufficient sunlight ).
- Charging indicator with green LED is flashing when the battery is charging and is on continuously when the battery is fully charged.
- Status indicator with red LED is on, indicating that everything is normal.
- Status indicator with yellow LED indicates whether the output voltage is output.
Attention, please note !
1. The charging power of the solar module is directly related to the intensity of the sun's rays and the angle of the solar module to the sun. solar module to the sun.
If the conditions are not met, the battery will not be charged sufficiently.
2. Do not use a load that does not match the voltage and current, which could cause that the electronics do not work or burn out!
3. Observe battery note for disposal!
- integrated charge controller and voltage regulator
- Indicator lamp for battery charge level
- 2 m connection cable
- Dimension : mm without bracket
- Bracket for wall and floor mounting
";s:20:"products_description";s:4492:"suitable for HK-Bat from JOSTechnik with use attract light
- with integrated charging electronics, as well as 2 m connection cable and bracket for wall or floor mountingJust a few days of sunshine per year are enough for the HK-Bat to run smoothly when using attraction light up to 2 h daily.
Scope of delivery:
monocrystalline solar panel 12W dimension : mm without bracketPlease use the solar panel to charge the built-in battery in the sunlight for 3-4 days for the first time ( about 16 hours when charged by sufficient sunlight ).
- Charging indicator with green LED is flashing when the battery is charging and is on continuously when the battery is fully charged.
- Status indicator with red LED is on, indicating that everything is normal.
- Status indicator with yellow LED indicates whether the output voltage is output.
Attention, please note !
1. The charging power of the solar module is directly related to the intensity of the sun's rays and the angle of the solar module to the sun. solar module to the sun.
If the conditions are not met, the battery will not be charged sufficiently.
2. Do not use a load that does not match the voltage and current, which could cause that the electronics do not work or burn out!
3. Observe battery note for disposal!
- integrated charge controller and voltage regulator
- Indicator lamp for battery charge level
- 2 m connection cable
- Dimension : mm without bracket
- Bracket for wall and floor mounting
";s:20:"products_description";s:4492:"suitable for HK-Bat from JOSTechnik with use attract light
- with integrated charging electronics, as well as 2 m connection cable and bracket for wall or floor mountingJust a few days of sunshine per year are enough for the HK-Bat to run smoothly when using attraction light up to 2 h daily.
Scope of delivery:
monocrystalline solar panel 12W dimension : mm without bracketPlease use the solar panel to charge the built-in battery in the sunlight for 3-4 days for the first time ( about 16 hours when charged by sufficient sunlight ).
- Charging indicator with green LED is flashing when the battery is charging and is on continuously when the battery is fully charged.
- Status indicator with red LED is on, indicating that everything is normal.
- Status indicator with yellow LED indicates whether the output voltage is output.
Attention, please note !
1. The charging power of the solar module is directly related to the intensity of the sun's rays and the angle of the solar module to the sun. solar module to the sun.
If the conditions are not met, the battery will not be charged sufficiently.
2. Do not use a load that does not match the voltage and current, which could cause that the electronics do not work or burn out!
3. Observe battery note for disposal!
- with integrated charging electronics, as well as 3 m connection cable and bracket for wall or floor mounting
- Indicator lamp for battery charge status
-Solar panel 6V 7W Dimensions : 180 x 230 mm without bracket Lithium battery 6V 8800 mAh Connection cable 3m with tinned wire ends Bracket for wall and floor mounting
Please charge the built-in battery with the solar panel for the first time in sunlight for 3-5 days.
Charging indicator 1 is normally on, indicating that the battery is charging (see picture).
Charging indicator 2 is normally on, indicating that the battery is fully charged (see picture).
Attention, please note!
1. The output current is directly related to the intensity of the sun's rays and the angle of the solar module to the sun. angle of the solar module to the sun. If the conditions are not met, the rated current will not be reached.
2. USB interface has a load detection function and is only suitable for charging mobile phones, other loads may not work
3. do not use a load that does not match the voltage and current, which could result in the electronics not working or burn out!
4. observe battery instructions when disposing of the battery!
5. The new solar kit is offered as 2nd choice - hobby goods and is therefore not returnable. Due to slight damage to the solar panel (see picture), only a charging current of 300 mA is generated.
";s:11:"products_id";i:573;s:14:"products_price";s:7:"19.3277";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}}s:1:"e";O:8:"DateTime":3:{s:4:"date";s:26:"2026-03-08 01:52:42.929423";s:13:"timezone_type";i:3;s:8:"timezone";s:13:"Europe/Berlin";}s:1:"g";a:0:{}s:1:"m";N;s:1:"c";N;}