a:6:{s:1:"k";s:46:"categories-v1-155d68b35b37c20494b49792b5b78740";s:1:"d";a:20:{i:0;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:7:"PHB2-RH";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162886";s:13:"products_name";s:91:"Poultry House Butler PHB2-RH as frame unit with self-locking chicken door and light control";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:7;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"475_0.jpg";s:15:"products_weight";s:5:"1.600";s:26:"products_short_description";s:522:"
- solid frame
- self-locking chicken flap 230x340mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
";s:20:"products_description";s:10053:"Poultry House Butler PHB2-RH with self-locking chicken flap and light control
automatically opens and closes a self-locking chicken flap 230x340 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The Poultry House Butler PHB2-RH is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RH contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
If there is an animal under the slider during the closing process, the PHB2-RH motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RH is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RH initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RH closes and opens only by timer, not by light sensor
- PHB2-RH closes and opens by light sensor only, not by time
- PHB2-RH closes and opens only by light sensor + adjustable closing time delay
- PHB2-RH closes and opens via timer and light sensor
- PHB2-RH closes and opens via timer or light sensor
- PHB2-RH closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RH to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RE with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking chicken flap 230x340 mm Dimensions of the frame: width 260 mm, length 570 mm, height 65 mm - Power supply 230 V / 12 V DC ( Approved for indoor use! )
- Fastening material 4 screws and dowels each
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:475;s:14:"products_price";s:8:"192.4370";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:1;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:9:"PHB2AE-RH";s:15:"products_master";i:475;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836245";s:13:"products_name";s:93:"PHB2AE-RH as frame unit with self-locking chicken flap and light control, separate drive unit";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:1;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"526_0.jpg";s:15:"products_weight";s:5:"1.800";s:26:"products_short_description";s:877:"
- Drive unit and flap actuator separate
- solid frame
- self-locking chicken flap 230x340mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
";s:20:"products_description";s:10783:" Poultry House Butler PHB2AE-RH with self-locking chicken flap and light control
automatically opens and closes a self-locking chicken flap 230x340 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
The Poultry House Butler PHB2AE-RH is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
In the PHB2AE-RH, there is a temperature sensor in the control unit that measures the temperature of the environment and can thus trigger various switching processes: Depending on the installation location, an additional external temperature sensor is required, e.g. to switch an electric heat lamp (if the stable temperature is too low) or a fan / ventilator for 12V DC for max. 5 hrs. For 230V accessories, an additional circuit breaker for mains voltage is required in a separate housing. To delay or prevent the opening of the flap at low outdoor temperatures, the outdoor temperature must be measured.
If there is an animal under the slider during the closing process, the PHB2-RH motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RH is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RH initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RH closes and opens only by timer, not by light sensor
- PHB2-RH closes and opens by light sensor only, not by time
- PHB2-RH closes and opens only by light sensor + adjustable closing time delay
- PHB2-RH closes and opens via timer and light sensor
- PHB2-RH closes and opens via timer or light sensor
- PHB2-RH closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
PHB2AE-RH Frame with drive unit can be fixed to the wall above the opening hole using the 4 screws supplied. Control unit without fixing material ) can be mounted anywhere. The total height when the flap is completely open is approx. twice the flap length!
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2AE-RH - Control unit with temperature sensor, timer and coiled pull cord ( without fixing material )
- Fixed frame with drive unit in its own housing with integrated self-locking chicken flap ( width x length ) 230 x 340 mm Dimensions of the frame : width 260 mm, length 570 mm, height 65 mm
- Power supply 230 V / 12 V DC (approved for indoor use!)
- Fixing material 4 screws and dowels each only for drive unit on frame
Connections for external remote display are provided!
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:526;s:14:"products_price";s:8:"209.2437";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:2;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:7:"PHB2-RE";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162893";s:13:"products_name";s:92:"Poultry House Butler PHB2-RE as a frame unit with a self-locking duck flap and light control";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:13;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"471_0.jpg";s:15:"products_weight";s:5:"1.960";s:26:"products_short_description";s:491:"
- solid frame
- self-locking chicken flap 300x450mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
";s:20:"products_description";s:10491:"
Poultry House Butler PHB2-RE with self-locking ducks flap and light control
automatically opens and closes a self-locking ducks flap 300x450 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The Poultry House Butler PHB2-RE is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RE contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
If there is an animal under the slider during the closing process, the PHB2-RE motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RE is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RE initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RE closes and opens only by timer, not by light sensor
- PHB2-RE closes and opens by light sensor only, not by time
- PHB2-RE closes and opens only by light sensor + adjustable closing time delay
- PHB2-RE closes and opens via timer and light sensor
- PHB2-RE closes and opens via timer or light sensor
- PHB2-RE closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RE to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RE with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking ducks flap 300x450 mm Dimensions of the frame: width 260 mm, length 580 mm, height 65 mm - Power supply 230 V / 12 V DC ( Approved for indoor use! )
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:471;s:14:"products_price";s:8:"200.8403";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:3;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:9:"PHB2AE-RE";s:15:"products_master";i:471;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836252";s:13:"products_name";s:92:"PHB2AE-RE as a frame unit with self-locking duck flap and light control, separate drive unit";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:2;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"527_0.jpg";s:15:"products_weight";s:5:"2.160";s:26:"products_short_description";s:877:"
- Drive unit and flap actuator separate
- solid frame
- self-locking chicken flap 300x450mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
";s:20:"products_description";s:10852:"
Poultry House Butler PHB2AE-RE with self-locking duck flap and light control
automatically opens and closes a self-locking duck flap B=300 x H=450 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
The Poultry House Butler PHB2AE-RE is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
In the PHB2AE-RE, there is a temperature sensor in the control unit that measures the temperature of the environment and can thus trigger various switching processes: Depending on the installation location, an additional external temperature sensor is required, e.g. to switch an electric heat lamp (if the stable temperature is too low) or a fan / ventilator for 12V DC for max. 5 hrs. For 230V accessories, an additional circuit breaker for mains voltage is required in a separate housing. To delay or prevent the opening of the flap at low outdoor temperatures, the outdoor temperature must be measured.
If there is an animal under the slider during the closing process, the PHB2-RE motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RE is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RE initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RE closes and opens only by timer, not by light sensor
- PHB2-RE closes and opens by light sensor only, not by time
- PHB2-RE closes and opens only by light sensor + adjustable closing time delay
- PHB2-RE closes and opens via timer and light sensor
- PHB2-RE closes and opens via timer or light sensor
- PHB2-RE closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
PHB2AE-RE Frame with drive unit can be fixed to the wall above the opening hole using the 4 screws supplied. Control unit without fixing material ) can be mounted anywhere. The total height when the flap is completely open is approx. twice the flap length!
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2AE-RE - Control unit with temperature sensor, timer and coiled pull cord ( without fixing material )
- Fixed frame with drive unit in its own housing with integrated self-locking duck flap ( width x length ) 300 x 450 mm Dimensions of the frame : width 330 mm, length 680 mm, height 65 mm
- Power supply 230 V / 12 V DC (approved for indoor use!), Ordernumber: 476
- Fixing material 4 screws and dowels each only for drive unit on frame
Connections for external remote display are provided!
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:527;s:14:"products_price";s:8:"217.6471";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:4;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:7:"PHB2-RG";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162909";s:13:"products_name";s:89:"Poultry House Butler PHB2-RG as frame unit with self-locking goose flap and light control";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:9;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"472_0.jpg";s:15:"products_weight";s:5:"2.400";s:26:"products_short_description";s:522:"
- solid frame
- self-locking chicken door 340x550mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
";s:20:"products_description";s:10500:"
Poultry House Butler PHB2-RG with self-locking geese flap and light control
automatically opens and closes a self-locking geese flap 340x550 mm in a fixed frame at the poultry and geese house, aviary or small animal enclosure at dusk and / or at night.
The Poultry House Butler PHB2-RG is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RG contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
If there is an animal under the slider during the closing process, the PHB2-RG motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RG is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RG is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RG initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RG closes and opens only by timer, not by light sensor
- PHB2-RG closes and opens by light sensor only, not by time
- PHB2-RG closes and opens only by light sensor + adjustable closing time delay
- PHB2-RG closes and opens via timer and light sensor
- PHB2-RG closes and opens via timer or light sensor
- PHB2-RG closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RG to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RG with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking geese flap 340x550 mm Dimensions of the frame: width 370 mm, length 840 mm, height 65 mm
- Power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 476
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:472;s:14:"products_price";s:8:"209.2437";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:5;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:9:"PHB2AE-RG";s:15:"products_master";i:472;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836269";s:13:"products_name";s:93:"PHB2AE-RG as a frame unit with self-locking goose flap and light control, separate drive unit";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:1;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"528_0.jpg";s:15:"products_weight";s:5:"2.600";s:26:"products_short_description";s:846:"
- Drive unit and flap actuator separate
- solid frame
- self-locking chicken flap 340x550mm
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- Patent application (EP3822445)
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
";s:20:"products_description";s:10829:"
Poultry House Butler PHB2AE-RG with self-locking goose flap and light control
automatically opens and closes a self-locking goose flap 340x550 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
The Poultry House Butler PHB2AE-RG is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
In the PHB2AE-RG, there is a temperature sensor in the control unit that measures the temperature of the environment and can thus trigger various switching processes: Depending on the installation location, an additional external temperature sensor is required, e.g. to switch an electric heat lamp (if the stable temperature is too low) or a fan / ventilator for 12V DC for max. 5 hrs. For 230V accessories, an additional circuit breaker for mains voltage is required in a separate housing. To delay or prevent the opening of the flap at low outdoor temperatures, the outdoor temperature must be measured.
If there is an animal under the slider during the closing process, the PHB2-RH motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RG is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RG is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RH initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RG closes and opens only by timer, not by light sensor
- PHB2-RG closes and opens by light sensor only, not by time
- PHB2-RG closes and opens only by light sensor + adjustable closing time delay
- PHB2-RG closes and opens via timer and light sensor
- PHB2-RG closes and opens via timer or light sensor
- PHB2-RG closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
PHB2AE-RG Frame with drive unit can be fixed to the wall above the opening hole using the 4 screws supplied. Control unit without fixing material ) can be mounted anywhere.
The total height when the flap is completely open is approx. twice the flap length!
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2AE-RG - Control unit with temperature sensor, timer and coiled pull cord ( without fixing material )
- Fixed frame with drive unit in its own housing with integrated self-locking goose flap ( width x length ) 230 x 340 mm Dimensions of the frame : width 370 mm, length 840 mm, height 65 mm
- Power supply 230 V / 12 V DC (approved for indoor use!), Ordernumber: 476
- Fixing material 4 screws and dowels each only for drive unit on frame
Connections for external remote display are provided!
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:528;s:14:"products_price";s:8:"226.0504";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:6;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:7:"PHB2-RB";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162916";s:13:"products_name";s:67:"PHB2-RB as frame unit with self-locking duck flap and light control";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:14;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"473_0.jpg";s:15:"products_weight";s:5:"2.400";s:26:"products_short_description";s:501:"
- solid frame
- self-locking chicken flap 420x370mm for organic farming
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
- Optional accessories: GSM module Android APP, external sensors for temperature, humidity and light
";s:20:"products_description";s:10220:"Poultry House Butler PHB2-RB with self-locking flap 370x410 mm and light control
The Poultry House Butler PHB2-RB is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RB contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
If there is an animal under the slider during the closing process, the PHB2-RB motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RB is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RB is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RB initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RB closes and opens only by timer, not by light sensor
- PHB2-RB closes and opens by light sensor only, not by time
- PHB2-RB closes and opens only by light sensor + adjustable closing time delay
- PHB2-RB closes and opens via timer and light sensor
- PHB2-RB closes and opens via timer or light sensor
- PHB2-RB closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RB to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RB with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking flap for BIO-posture 420x370 mm Dimensions of the frame: width 440 mm, length 570 mm, height 65 mm - Power supply 230 V / 12 V DC ( Approved for indoor use! )
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:473;s:14:"products_price";s:8:"208.4034";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:7;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:7;s:14:"products_model";s:9:"PHB2AE-RB";s:15:"products_master";i:473;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836276";s:13:"products_name";s:85:"PHB2AE-RB as frame unit with self-locking flap and light control, separate drive unit";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:2;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"529_0.jpg";s:15:"products_weight";s:5:"2.400";s:26:"products_short_description";s:748:"
- Drive unit and flap actuator separate
- solid frame
- self-locking chicken flap 420x370mm chickens - husbandry
- integrated light control
- Simulation sunrise and sunset
- Temperature dependent and humidity dependent control options
- optional connection module controls dimmable 230 V lighting as so-called attracting light, heating or fan
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
";s:20:"products_description";s:10799:"
Poultry House Butler PHB2AE-RB with self-locking chicken flap and light control
automatically opens and closes a self-locking chicken flap B=420 x H=370 mm in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
The Poultry House Butler PHB2AE-RB is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
In the PHB2AE-RB, there is a temperature sensor in the control unit that measures the temperature of the environment and can thus trigger various switching processes: Depending on the installation location, an additional external temperature sensor is required, e.g. to switch an electric heat lamp (if the stable temperature is too low) or a fan / ventilator for 12V DC for max. 5 hrs. For 230V accessories, an additional circuit breaker for mains voltage is required in a separate housing. To delay or prevent the opening of the flap at low outdoor temperatures, the outdoor temperature must be measured.
If there is an animal under the slider during the closing process, the PHB2-RB motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!
The PHB2-RH is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RH is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RB initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RB closes and opens only by timer, not by light sensor
- PHB2-RB closes and opens by light sensor only, not by time
- PHB2-RB closes and opens only by light sensor + adjustable closing time delay
- PHB2-RB closes and opens via timer and light sensor
- PHB2-RB closes and opens via timer or light sensor
- PHB2-RB closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
PHB2AE-RB Frame with drive unit can be fixed to the wall above the opening hole using the 4 screws supplied. Control unit without fixing material ) can be mounted anywhere. The total height when the flap is completely open is approx. twice the flap length!
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2AE-RB - Control unit with temperature sensor, timer and coiled pull cord ( without fixing material )
- Fixed frame with drive unit in its own housing with integrated self-locking chicken flap ( width x length ) 420 x 370 mm Dimensions of the frame : width 450 mm, length 570 mm
- Power supply 230 V / 12 V DC (approved for indoor use!), Ordernumber: 476
- Fixing material 4 screws and dowels each only for drive unit on frame
Connections for external remote display are provided!
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:11:"products_id";i:529;s:14:"products_price";s:8:"225.2101";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:8;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:3:"NTC";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836214";s:13:"products_name";s:18:"Temperature Sensor";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:32;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"416_0.jpg";s:15:"products_weight";s:5:"0.030";s:26:"products_short_description";s:83:".... to mount the gate control unit indoors. Individual cable length are available!";s:20:"products_description";s:552:"JOSTechnik - Temperature sensor
The temperature sensor, as an optional accessory for the " Poultry Light Manager " light control system, is required to measure the temperature in the barn or in the outdoor area. It can be used to influence the opening and closing times of the flaps and to regulate the control of heaters and fans.
Cable length: 1.5 m ( total length 1.53 m )
Sleeve length: 6*30 mm ( stainless steel 304)
R25: 2KΩ±1%
B25/50: 3920K
Measuring range: - 40°C - 250°C
";s:11:"products_id";i:416;s:14:"products_price";s:6:"8.1933";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:9;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:5:"DHT22";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836238";s:13:"products_name";s:54:"JOSTechnik - DHT22 Sensor for temperature and humidity";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:843;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"520_0.jpg";s:15:"products_weight";s:5:"0.000";s:26:"products_short_description";s:138:"DHT22 as an optional accessory to the Poultry House Butler PHB2 ..." is required to measure temperature and humidity in the poultry house.";s:20:"products_description";s:674:"JOSTechnik - DHT22 Sensor for temperature and humidity
The DHT22 is a reliable sensor as an accessory for the PHB2... for measuring temperature and humidity in the barn.
Technical data:
Digital temperature and humidity measurement
Humidity measuring range: 0 to 100% relative humidity
Humidity measuring accuracy: ±2% RH
Temperature range: -40 to +80 C
Temperature measurement accuracy ±0.5
Dimensions: 28mm x 12mm x 10mm
Scope of delivery:
DHT 22 with 1.5 m cable";s:11:"products_id";i:520;s:14:"products_price";s:7:"15.1261";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:10;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:11:"1663LDR_1/1";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:0:"";s:13:"products_name";s:66:"LDR outdoor light sensor 1m with control line for JT-KS with cable";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:428;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"382_0.jpg";s:15:"products_weight";s:5:"0.040";s:26:"products_short_description";s:246:"LDR outdoor light sensor as an optional accessory with cable lengths of 1 - 8 m for JOSTechnik damper actuators if these are installed indoors.
Cannot be used for PDO, JT-HK until 12/2019 or KS-SFH!";s:20:"products_description";s:3635:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 1m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
De buitenlichtsensor LDR als optioneel accessoire is nodig als het apparaat binnenshuis wordt gemonteerd. In dit geval wordt de buitenlichtsensor buiten het gebouw gemonteerd en via de besturingskabel met het apparaat verbonden. Kabellengte 1 m Compatibel met PSD..., PHB2... en HK+HK-ZSU vanaf 2020 ! Niet geschikt voor JT-HK tot 12/2019 !
Czujnik światła zewnętrznego LDR jako wyposażenie dodatkowe jest wymagany w przypadku montażu urządzenia wewnątrz pomieszczeń. W tym przypadku czujnik światła zewnętrznego jest montowany na zewnątrz budynku i podłączany do urządzenia za pomocą kabla sterującego. Długość kabla 1 m Kompatybilny z PSD..., PHB2... i HK+HK-ZSU od 2020 roku! Nie dotyczy JT-HK do 12/2019!
La sonde de luminosité extérieure LDR en tant qu'accessoire optionnel est nécessaire si l'appareil est monté à l'intérieur. Dans ce cas, la sonde de luminosité extérieure est montée à l'extérieur du bâtiment et reliée à l'appareil par le câble de commande. Longueur de câble 1 m Compatible avec PSD..., PHB2... et HK+HK-ZSU à partir de 2020 ! Non applicable pour JT-HK jusqu'au 12/2019 !
Il sensore di luce esterna LDR come accessorio opzionale è necessario se il dispositivo è montato all'interno. In questo caso, il sensore di luce esterno viene montato all'esterno dell'edificio e collegato all'unità tramite il cavo di comando. Lunghezza cavo 1 m Compatibile con PSD..., PHB2... e HK+HK-ZSU dal 2020! Non applicabile per JT-HK fino al 12/2019 !
Senzor venkovního osvětlení LDR jako volitelné příslušenství je vyžadován, pokud je zařízení instalováno uvnitř. Čidlo vnějšího světla je instalováno mimo budovu a připojeno k zařízení pomocí ovládacího kabelu. Délka kabelu 1 m Kompatibilní pro PSD ..., PHB2 ... a HK + HK-ZSU od roku 2020! Nelze použít pro JT-HK do 12/2019!
";s:11:"products_id";i:382;s:14:"products_price";s:7:"14.2857";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:11;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:7:"230V12W";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836207";s:13:"products_name";s:62:"LED lamp 12W 230V IP65 - light strip dimmable via 1-10 V EEK E";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:0;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"499_0.jpg";s:15:"products_weight";s:5:"0.340";s:26:"products_short_description";s:580:"
- Attention: Connection to flap actuator only possible via additional connection module REL-LS-HL!
- LED tube dimmable 12W 230V dimmable via 1-10V
- for light control PLM, PHB2 and PHB2-R... from JOSTechnik
- without flickering with light controls from JOSTechnik
- perfectly smoothed DC voltage
- Energy efficiency class E
- Base light bar with mounting clips power cord
- Rated power consumption 12 W
- Dimensions length 600 mm
- Degree of protection IP65
";s:20:"products_description";s:1816:"LED tube dimmable 12W 230V dimmable via 1-10V
for light control PLM, PHB2 and PHB2-R... from JOSTechnik!
This 230 V LED tube with bracket can be dimmed without flickering with light controls from JOS Technik. Up to 10 dimmable light strips can be connected via the REL-LS-HL connection module.
If LED components are operated directly with a perfectly smoothed DC voltage (DC voltage without significant ripple noise), these LED lamps also show a flicker value that is negligible in practice and are therefore considered to be flicker-free per se.
Attention: Connection only possible via additional connection module REL-LS-HL!
Connecting the cables:
---------------------------------------
Brown cable -> 230V L
Blue cable -> 230V N
Gray cable -> DIMM +
Black cable -> DIMM -
---------------------------------------
Technical data
Supply voltage 230 V
Energy efficiency class E
Base light bar with mounting clips power cord
Rated power consumption 12 W
Luminous flux 1430
Lumens per watt 124.4 lm/W
Beam angle 120
Color temperature 3000 Kelvin - warm white
Color rendering index >80
Dimmable yes
Rated life 50,000 hours
number of switching cycles
Dimensions length 600 mm
ignition time
Residual brightness at end of life
temperature range
Weighted self-consumption
light output
Seconds to reach 60% of full luminous flux
Degree of protection IP65
Mercury content 0.0mg
Rated peak luminous intensity in candelas
Information on disposal:
Lamps with the WEEE mark can be returned to special collection points.
";s:11:"products_id";i:499;s:14:"products_price";s:7:"52.1008";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:12;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"12V12W";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0740972162787";s:13:"products_name";s:51:"LED-strip-light dimmable 12W / 12V-DC (IP 65) EEK F";s:19:"products_extra_text";s:50:"893880";s:17:"products_quantity";i:115;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"461_0.jpg";s:15:"products_weight";s:5:"0.113";s:26:"products_short_description";s:340:"
- Energy efficiency class F
- for light control from JOSTechnik and 12V light systems
- 12 V DC 12 W - LED lamp as light strip
- with bracket
- dimmable without flickering
Attention: Only suitable for 12 V DC !!!
";s:20:"products_description";s:2052:" LED-strip-light dimmable 12W / 12V-DC
for light control PLM and PLMmini from JOSTechnik and 12V light systems!
Attention: Only suitable for 12 V DC !!!
This 12 V DC LED lamp as a light bar with bracket can be dimmed without flickering with light controls from JOS Technik. Up to 3 dimmable 12W light strips can be connected directly without a relay module.
If LED components are operated directly with a perfectly smoothed DC voltage (DC voltage without significant ripple noise), these LED lamps also show a flicker value that is negligible in practice and are therefore considered flicker-free.
Technical dataSupply voltage 12 V DC
Energy efficiency category F
Socket strip light with mounting clips
Power consumption 12 W
Light flux 1 050 in Sphere (360°)
Lumen per Watt ≥ 90 lm / W
Beam angle 120°
Colour temperature 2800 - 3200 Kelvin - warm white
Colour rendering index > 81 RA
Dimmable yes
Average light bulb lifespan 50.000 hours
Average amount of switching cycles > 10.000
Dimensions (L x W x H) 340mm x 18mm x 12mm
Ignition time >0,3 s
Intensity at the end of lifespan 15 %
Temperature range -20°C - +40°C
Weighted power consumption 12,0 kWh / 1000 h
Luminous efficiency ≥ 96%
Seconds until 60% of full light flux is reached 0,58 s
Protection class IP 65
Mercury content 0,0 mg
Max. light intensity (candela) 600 cd
Proper disposal:
Lamps labelled with the WEEE symbol can be returned to suitable collection centres.
";s:11:"products_id";i:461;s:14:"products_price";s:7:"30.2521";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:13;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:5:"12V6W";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:12:"054047835576";s:13:"products_name";s:50:"LED-strip-light dimmable 6W / 12V-DC (IP 65) EEK F";s:19:"products_extra_text";s:50:"991655";s:17:"products_quantity";i:60;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"323_0.jpg";s:15:"products_weight";s:5:"0.094";s:26:"products_short_description";s:213:"for light controller from JOSTechnik and 12V-DC lighting systems!
Attention: Only adapted for 12V-DC !!!
This 12V-DC LED-strip-light, is flicker-free and is dimmable.";s:20:"products_description";s:2060:" LED-strip-light dimmable 6W / 12V-DC
for light control of JOS Technik 12V flap actuators and for 12V lighting systems!
Attention: Only suitable for 12 V DC !!!
This 12 V DC LED lamp as a light bar with bracket can be dimmed without flickering with light controls from JOS Technik. Up to 5 dimmable 6W light strips can be connected directly without a relay module.
If LED components are operated directly with a perfectly smoothed DC voltage (DC voltage without significant ripple noise), these LED lamps also show a flicker value that is negligible in practice and are therefore considered flicker-free.
Technical dataSupply voltage 12 V DC
Energy efficiency category F
Socket strip light with mounting clips
Power consumption 6 W
Light flux 554 in Sphere (360°)
Lumen per Watt ≥ 90-100 lm / W
Beam angle 120°
Colour temperature 2800 - 3200 Kelvin - warm white
Colour rendering index > 81 RA
Dimmable yes
Average light bulb lifespan 50.000 hours
Average amount of switching cycles > 10.000
Dimensions (L x W x H) 340mm x 18mm x 12mm
Ignition time >0,3 s
Intensity at the end of lifespan 15 %
Temperature range -20°C - +40°C
Weighted power consumption 6,0 kWh / 1000 h
Luminous efficiency ≥ 96%
Seconds until 60% of full light flux is reached 0,58 s
Protection class IP 65
Mercury content 0,0 mg
Max. light intensity (candela) 600 cd
Proper disposal:
Lamps labelled with the WEEE symbol can be returned to suitable collection centres.
";s:11:"products_id";i:323;s:14:"products_price";s:7:"28.5714";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:14;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:3:"451";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:0:"";s:13:"products_name";s:61:"Control light display 1m Poultry House Butler PHB und PLMmini";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:0;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"451_0.jpg";s:15:"products_weight";s:5:"0.260";s:26:"products_short_description";s:174:"The remote display with selectable cable lengths of 1-6 m displays the status of the flap and all devices connected to the PHB2, PHB2-R... such as heaters, fans and lighting.";s:20:"products_description";s:376:"JOS Technik - remote display
The remote display assumes the status display for the flap and all devices connected to the PHB2... , PHB or to the PLMmini (additional device to the PHB), such as heaters, fans and lighting.
Size: 52*50*35mm
Scope of delivery: remote display with 1m cable
";s:11:"products_id";i:451;s:14:"products_price";s:7:"31.9328";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:15;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:7:"REL-HLB";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0740972162848";s:13:"products_name";s:53:"Rel-HLB Connecting module for heaters and ventilators";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:721;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"146_0.jpg";s:15:"products_weight";s:5:"0.050";s:26:"products_short_description";s:124:"for connecting 230 V - heaters or ventilators with a power consumption of max. 2000 W !";s:20:"products_description";s:840:"for connecting heaters or ventilators with 230 V operating voltage !
The “Poultry Light Manager” supplies a 12 V control voltage for that module, so it it possible to connect and switch devices with 230 V operating voltage and a power consumption of max. 2000 W (like heaters or ventilators).
!!! Please note: The connection of 230-Volt-devices like heaters, ventilators, lamps and fluorescent tubes have only to be done by qualified professionals.
";s:11:"products_id";i:146;s:14:"products_price";s:7:"11.7647";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:16;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"FB4T1S";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836290";s:13:"products_name";s:26:"Radio Remote Control JT-FB";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:927;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"491_0.jpg";s:15:"products_weight";s:5:"0.051";s:26:"products_short_description";s:836:"
- manual operation of the automatic chicken flaps or flap actuators from JOS Technik
- open or close wirelessly
- switch lighting
- easy to retrofit as it is plugged into the existing connection
- 1 transmitter + 1 receiver
- Outdoor range: approx. 20 - 30 m
Not for series HK-Bat and HK-Bat-R...
";s:20:"products_description";s:1714:"JOSTechnik - radio remote control JT-FB4T
for manual operation of the automatic chicken flap or flap actuator PHB2 and PHB2-R... (not HK-Bat and HK-Bat-R...) . With the radio remote control JT-FB4T you can wirelessly open or close the PHB2 and PHB2-R... and / or switch the lighting on and off, but not dim it.
After operating the radio remote control to open and close the flap , a complete cycle must always be completed before the flap actuator switches back to automatic mode! If the light is switched on manually but not switched off, the lighting is automatically switched off at 11:00 p.m. when the device switches to the night time range.
When ordered together with the flap actuator devices PHB2, the radio remote control is installed. Otherwise easy to retrofit, since it is simply plugged onto the existing connection .
Not suitable if a solar energy set or batteries are selected as the power supply, as the receiver constantly draws electricity!
Scope of delivery:
Radio remote control - 4 buttons with 1 transmitter and 1 associated receiver
Outdoor range: approx. 20 - 30 m
Attention: When retrofitting , the radio remote control must be trained! See note on invoice, delivery note !!!
";s:11:"products_id";i:491;s:14:"products_price";s:7:"15.9664";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:17;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"FB4T2S";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836306";s:13:"products_name";s:39:"Radio Remote Control JT-FB4T - 2 Sender";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:884;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"492_0.jpg";s:15:"products_weight";s:5:"0.051";s:26:"products_short_description";s:860:"
- manual operation of the automatic chicken flaps or flap actuators from JOS Technik
- open or close wirelessly
- switch lighting
- easy to retrofit as it is plugged into the existing connection
- 2 transmitters + 1 receiver
- Outdoor range: approx. 20 - 30 m
Not for series HK-Bat and HK-Bat-R...
";s:20:"products_description";s:1848:"JOSTechnik - radio remote control JT-FB4T
for manual operation of the automatic chicken flap or flap actuator PHB2 and PHB2-R... (not HK-Bat and HK-Bat-R...) . With the radio remote control JT-FB4T you can wirelessly open or close the PHB2 and PHB2-R... and / or switch the lighting on and off, but not dim it.
After operating the radio remote control to open and close the flap , a complete cycle must always be completed before the flap actuator switches back to automatic mode! If the light is switched on manually but not switched off, the lighting is automatically switched off at 11:00 p.m. when the device switches to the night time range.
When ordered together with the flap actuator devices PHB2, the radio remote control is installed. Otherwise easy to retrofit, since it is simply plugged onto the existing connection .
Not suitable if a solar energy set or batteries are selected as the power supply, as the receiver constantly draws electricity!
Scope of delivery:
Radio remote control - 4 buttons with 2 transmitter and 1 associated receiver
Outdoor range: approx. 20 - 30 m
Attention: When retrofitting , the radio remote control must be trained! See note on invoice, delivery note !!!
";s:11:"products_id";i:492;s:14:"products_price";s:7:"20.1681";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:18;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:16;s:14:"products_model";s:13:"MEC0381V1-A99";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0740972162770";s:13:"products_name";s:51:"Barn fan 12V DC for poultry house (accessories PHB)";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:1;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"460_0.jpg";s:15:"products_weight";s:5:"0.906";s:26:"products_short_description";s:278:"
- 12VDC 10W
- Air throughput 183.83m³/h
- direct control from Poultry House Butler PHB2
- the direction of the air outlet can be controlled by polarity reversal
- Air opening: 115mm diameter
";s:20:"products_description";s:810:"JOSTechnik - House fan for ventilation management in poultry houses
This house fan can be controlled via the relay module (REL-HL-PDO) of the Poultry House Butler PHB or manually with 12 V DC voltage.
The PHB takes over the ventilation management and ensures a more optimal house climate with this house fan as an accessory.
Operating voltage: 12V DC 10W
Air flow rate: 183.83m³/h
Dimension:
Width: 205 mm
Height: 155 mm
Depth: 85 mm
Air opening: 115 mm diameter
2 meter 2x0,34 cable preinstalled
A connection cable 2x0.34 mm² can be ordered separately. At your request, this will then be connected or pre-assembled to the fan before dispatch!
Please note this as a comment when ordering!
";s:11:"products_id";i:460;s:14:"products_price";s:7:"46.2185";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:19;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:10:"LIYY7x0,25";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:13:"products_name";s:70:"Control cable LIYY 7 x 0.25 for connecting drive unit and control unit";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:283;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"580_0.jpg";s:15:"products_weight";s:5:"0.060";s:26:"products_short_description";s:47:"Control cable LIYY 7 x 0.25 - Price per m";s:20:"products_description";s:265:"Control cable LIYY 7 x 0.25 for connecting drive unit and control unit
This 7-core control cable (with different colours for each core) can be used to connect a drive unit to the control unit. Please note the connection diagram!
Price per m
";s:11:"products_id";i:580;s:14:"products_price";s:6:"1.4286";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:2;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"1.0000";}}s:1:"e";O:8:"DateTime":3:{s:4:"date";s:26:"2026-02-28 16:16:47.364653";s:13:"timezone_type";i:3;s:8:"timezone";s:13:"Europe/Berlin";}s:1:"g";a:0:{}s:1:"m";N;s:1:"c";N;}